EasyManua.ls Logo

Focusrite Liquid Mix User Manual

Focusrite Liquid Mix
26 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
USER GUIDE
Rev. 1.0
Question and Answer IconNeed help?

Do you have a question about the Focusrite Liquid Mix and is the answer not in the manual?

Focusrite Liquid Mix Specifications

General IconGeneral
Number of Channels32
Audio InterfaceFireWire
EQYes
DynamicsYes
Bit Depth24-bit
Plug-in FormatsVST, AU, RTAS
Power SupplyExternal Power Supply
ConnectivityFireWire 400
Software CompatibilityVST, AU, RTAS
Sample Rate44.1 kHz, 48 kHz
EQ Models40

Summary

Hardware Controls

Software GUI Controls

Applying Compression and EQ within the Sequencer

Selecting Compressors and EQs

Adjusting Compressor Settings

Threshold

Sets the signal level for compression to start; lower values compress more aggressively.

Ratio

Defines the degree of gain reduction applied to the signal exceeding the threshold.

Attack

Controls the speed at which the compressor reacts to signals crossing the threshold.

Release

Determines how quickly the compressor stops reducing gain after the signal drops below threshold.

Gain Makeup

Compensates for signal level reduction caused by compression by increasing output gain.

Modifying EQ Settings

Gain

Adjusts the boost or cut level for a specific frequency band in the EQ.

Snapshots - Saving Liquid Mix Settings

Restoring Settings

Troubleshooting