APPLYING COMPRESSION AND EQ WITHIN THE SEQUENCER
To apply compression or EQ to a track within the sequencer, an instance of the Liquid Mix software must be
activated. The software will appear in your list of VST or AU plug-ins. Open up a mono or stereo Liquid Mix to
begin applying vintage textures to your track. The software window will open on screen and (for the first
instance) will automatically become active on the Liquid Mix hardware.
It is advisable at this stage to name the instance so that you can easily locate it from the Liquid Mix
hardware. To do this, click on the Track box in the top left of the software GUI and write an appropriate name,
e.g. Vocal, Drums etc. Now, if wishing to control the Liquid Mix on a particular track from the hardware,
simply press the Track Select button below the LCD screen and then scroll to the corresponding name in the
list using the data encoder, then press the encoder to select.
At 44.1/48kHz sample rates, 32 separate mono instances of Liquid Mix can be activated on any tracks. Note
that at higher sample rates, this number decreases as listed in the Liquid Mix Specifications.
To Next Page
Loading...