To Next PageTo Next Page
Need help?Do you have a question about the FOGATTI Etank 25 and is the answer not in the manual?
Defines warning symbols like NOTICE, CAUTION, WARNING, DANGER and additional symbols used in the manual.
Provides essential safety precautions for operating the water heater, including grounding and installation guidelines.
Details the different models (FDES-ET25, FDES-ET40, FDES-ET80) and identifies key components.
Provides detailed measurements for each water heater model in inches.
Lists key specifications including voltage, power, pressure, and temperature range for each model.
Instructions for securely mounting the water heater on a wall or floor.
Guidance on connecting the cold water inlet and hot water outlet pipes.
Explains thermal expansion and provides recommendations to prevent related issues.
Steps to fill the heater, purge air, check for leaks, and power on the unit.
Instructions on how to adjust the water temperature using the control knob.
Procedure for safely removing the front cover to access internal components.
Steps to empty the water from the heater for maintenance purposes.
Explains the anode rod's function and the importance of annual inspection.
Detailed steps for safely removing the heating element for inspection or replacement.
Procedure for replacing the anode rod to protect the tank from corrosion.
Steps for removing and installing a new heating element.
Instructions for replacing the thermostat to ensure proper temperature control.
How to reset the high limit switch and check thermostat operation.
General| Model | Etank 25 |
|---|---|
| Temperature Range | 95-167°F |
| Flow Rate | 1.06-4.1 GPM |
| Type | Tankless |
| Ignition System | Electric |
| Power | 25 kW |
