USING YOUR TEA MASTER
GETTING TO KNOW YOUR TEA MASTER
BEFORE FIRST USE
1. Remove and safely discard any packaging material or promotional labels
attached to your kettle.
2. It is recommended that filling the kettle to the maximum level with cold tap
water before your first using, bring to the boil by selecting the BOIL 212 °F,
then discard the water.
3. Your kettle will only operate when positioned on the power base. The kettle will
automatically switch o after the setting program is completed.
1. Remove tea infuser lid,fill with fresh
water(enough for the cups of tea you
wish to make),and place back the lid
in place.
Tea Infuser lid
Jug Lid
Stainless Steel
Tea Infuser
Glass Jug
Easy-Grip
Handle
Power Base
Power Cord
water
2. Place the kettle firmly on the power
base. short press the ON/OFF
button, rotate the knob left and right
to select the tea-making mode you
need, and then press START
CANCEL button to start heating.(
Icon is always on during heating)
3. Add tea leaves or tea bags once the
desired temperature is reached,the
START CANCEL button stops
flashing.
NOTE:Always fill the kettle between
the minimum (MIN) and maximum
(MAX) marks on the water window.
4. Infusing tea The correct brew time is
depending on the type of tea and
your personal preference.Enjoy your
cup of tea and let it brew as you like.
03 04
To Next Page
Loading...