What to do if smart key and Bluetooth remote control interfere with Foldaway Lifting Systems?
To properly control the Foldaway Lifting Systems with the Smart key panel, always close the App remote control screen when it is not in use.
What to do if the front cover sticks to the spa shell of Foldaway F1-230 V10?
If the front cover of your Foldaway Lifting Systems sticks to the spa shell, stop the lift. Then, gently pull the front cover upwards on the handle to detach it manually from the spa surface.
What to do if the safety mechanism unlocked on both sides of Foldaway F1-230 V10 Lifting Systems?
If the safety mechanism on both sides of your Foldaway Lifting Systems has unlocked, simply close the spa. The control system will automatically align the lift system.
What to do if the safety mechanism unlocked on one side of Foldaway Lifting Systems?
If the safety mechanism on one side of your Foldaway Lifting Systems has unlocked, push the upper carbon arm down, overcoming the unlock force, to level the cover. Then, simply close the spa using the smart key.
What to do if drive that runs after is loose in Foldaway Lifting Systems?
If the drive that runs after is loose in your Foldaway Lifting Systems, check the tightness of the center allen screw.
What to do if the stop nut in the carriage mechanism is not adjusted correctly in Foldaway F1-230 V10?
If the stop nut in the carriage mechanism of your Foldaway Lifting Systems is not adjusted correctly, use an allen key to adjust the stop nut inside the carbon support.
What does a blue continuous illumination indicate on Foldaway F1-230 V10?
A blue continuous illumination on Foldaway Lifting Systems indicates: 1. A current trip condition (overload, obstacle). 2. A system fault. 3. An active or incomplete alignment routine. If the alignment is in progress, wait for completion. If the alignment was stopped, start it again manually. Otherwise, remove all obstacles, allow the system to cool down, and command the drives in the opposite direction of the last utilization. If the failure persists, consult your customer service.
What does a red blinking illumination indicate on Foldaway Lifting Systems?
A red blinking illumination on Foldaway Lifting Systems indicates a failure in the automatic power stage utilization. Detach the controller from the main supply and wait for 15 seconds. Re-establish power and try lift utilization. If the failure persists, consult your local dealer. Close the spa cover manually.
What does a white blinking illumination indicate on Foldaway F1-230 V10 Lifting Systems?
A white blinking illumination of the docking light indicates an inconsistency in the stored lift position data. A new alignment must be initiated manually.
Steps to manually operate the lift in an emergency.
Covers electrical connection, operator responsibility, and environmental hazards.
Lists critical actions to avoid, such as operation by children or in storms.
Lists and identifies parts of the lift system based on Illustration A.
Explains the working principles of the foldaway lift system.
Protects users and must not be modified or bypassed.
Explains how to lock and unlock the lift system using the smart key.
Describes how to detach the cover from the lift carriage mechanism.
Details the safety clutch that protects the system from overload.
Warns about moving parts and potential drowning/entrapment hazards.
Explains how smart key light colors indicate different operational statuses or faults.
Details the hardware diagnostic system and status LED codes on the PCB.
General| Brand | Foldaway |
|---|---|
| Model | F1-230 V10 |
| Category | Lifting Systems |
| Language | English |
To Next Page