FOLSOM PresentationPRO PS-2001 - Page 46

OFRATE? (Returns the output frame rate.)
Command:
OSYNC n
Description: Adjusts the Output Sync.
Parameters: n - Sync mode; [1|2|3|4|5], -C|+H+V|+H-V|-H+V|-H-V
Query:
OSYNC?
Returns the Output Sync mode in the format:
=n
Example: OSYNC 3 (Adjusts the Output Sync value to be +H-V.)
OSYNC? (Returns the Output Sync mode.)
Command:
OTPM typ bx gr
Description: Selects the Output Test Pattern mode and selects the Test Pattern options.
Parameters: typ - Test Pattern Type; [0|1|2|3|4|5], Off|V Gray Ramp|H Gray Scl | Burst|Color Bars|Black
bx - Test Pattern Raster Box; [0|1], OFF|ON
gr - Test Pattern Grid; [0|1], OFF|ON
Query:
OTPM?
Returns the output test pattern and option mode settings in the format:
=m typ bx gr
Example: OTPM 2 1 1 (Horizontal Gray Scale test pattern has been selected with raster box on,
and grid on.)
OTPM? (Returns the output test pattern mode and option settings.)
Command:
PFSD n
Description: Progressive Frame Sequence Detection. This command will allow the detection of 3-2 pulldown to
be enabled or disabled for the current source.
Parameters: n - mode; [0|1], disable|enable
Query:
PFSD?
Returns the Progressive Frame Sequence Detection Mode in the format:
=n
Example: PFSD 0 A (Disable detection of 3-2 pulldown.)
PFSD? (Returns the progressive frame sequence detection mode.)
Command:
PPWR n
Description: Selects the Phantom Power mode.
Parameters: n - mode; [0|1], disable|enable
Query:
PPWR?
Returns the Phantom Power Mode in the format:
=n
Example: PPWR 0 (Disable phantom power mode.)
PPWR? (Returns the phantom power mode.)
Command:
RESET op
Description: Resets the system to factory defaults
Parameters: op - Reset operation; [A|F], All|Factory
Example: RESET A (Resets system to factory defaults and resets all user input
configuration files.)
Command:
RTE n
Manual # 26-0006901-00 / Revision E PresentationPRO – A/V Seamless Switcher 37