To Next PageTo Next Page
Need help?Do you have a question about the Fontaine Chatelet and is the answer not in the manual?
General| Brand | Fontaine |
|---|---|
| Model | Chatelet |
| Category | Bathroom Fixtures |
| Language | English |
Initial step to remove the mud guard before proceeding with installation.
Carefully slide the escutcheon onto the valve.
Place handle assembly on valve and rotate clockwise to secure.
Measure and note distance 'XX' if handle assembly won't secure escutcheon.
Unscrew the handle assembly anti-clockwise and remove the escutcheon.
Cut stem and nipple to the amount noted in step #4, avoiding damage to the valve.
Re-install the trimmed stem and nipple on the valve.
Slide escutcheon onto valve and place handle assembly to secure.
Apply Teflon tape to the shower arm and thread clockwise onto the nipple.
Thread the shower head clockwise onto the shower arm.
Indicates the successful completion of the shower installation.
Remove seats, cartridges, and washers before soldering to avoid voiding warranty.
Cover your drain to prevent losing small parts during installation.
Recommended operating temperature range is 0℃ to 55℃.
