MAKE A FOODSAVER
®
BAG:
1. Using scissors, cut enough
bag material from roll to
hold item, plus 3 inches
(7.62 cm). Be sure to cut
straight.
2. Insert one end of bag
material across Sealing
Strip.
3. Firmly press down with
your palm on both sides of
the appliance lid to lock.
Tip: You should feel and
hear an audible click for
each side when pushing
down with the palms
of your hands on the
appliance lid, indicating
the unit is fully locked.
4. Press Seal Button.
5. When Seal Indicator
Light stops ashing and
becomes constant, sealing
is complete. Press Lid
Release Buttons to open
lid.
HOW TO:
VS1200 SERIES QUICK START GUIDE
FoodSaver
®
Space Saving Vacuum Sealer
Español
p. 3
Français
p. 2
VACUUM SEAL FOODSAVER
®
ZIPPER BAGS:
(sold separately)
1. Prepare Zipper Bags
according to FoodSaver
®
Accessory Guidelines,
which are included with
accessory purchases. For
Zipper Bags, make sure not
to put any food under the
valve and press zipper closed with nger while bag is
lying down on a at surface.
2. Firmly press down with your palm on both sides of
the appliance lid to lock.
Tip: You should feel and hear an audible click for each
side when pushing down with the palms of your hands
on the appliance lid, indicating the unit is fully locked.
3. Insert one end of Accessory Hose into Accessory Port on
Appliance. Place Handheld Sealer on Zipper Bag valve.
4. Press Accessory Button.
5. Accessory light will pulse. All lights will illuminate
when complete.
Zipper bags are safe for pantry and fridge use only.
VACUUM SEAL A FOODSAVER
®
BAG:
1. Place item(s) in bag,
allowing at least 3 inches
(7.62 cm) of space between
bag contents and top of
bag.
2. Open Appliance Lid and
place open end of bag into
Vacuum Channel (Drip Tray).
3. Firmly press down with your
palm on both sides of the
appliance lid to lock.
Tip: You should feel and hear
an audible click for each side
when pushing down with the
palms of your hands on the
appliance lid, indicating the
unit is fully locked.
4. Press Vac/Seal Button
to begin vacuum and
sealing process. Motor will
continue to run until bag
is fully vacuumed, then will
automatically seal.
5. When Vac/Seal Indicator Light stops ashing and
becomes constant, press Release Buttons on both sides
to open. Remove bag.
Refrigerate, freeze or store as needed.
VACUUM SEAL FOODSAVER
®
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
®
Preserve
& Marinate Container
according to Guidelines,
which are included with
container purchase.
2. Firmly press down with your
palm on both sides of the
appliance lid to lock.
Tip: You should feel and hear an audible click for each
side when pushing down with the palms of your hands
on the appliance lid, indicating the unit is fully locked.
3. Insert one end of Accessory Hose into Accessory Port
on Appliance. Place Handheld Sealer on Container valve.
4. Press Accessory Button.
5. Accessory Light will pulse. All lights will illuminate when
complete.
To release vacuum and open, turn knob on lid to Open.
Place Bag on Sealing Strip
OPEN END
OPEN END
Close and lock lid
OPEN END
OPEN END
Press Seal Button
Place Bag in Vacuum Channel
Close and lock lid
SEALED END
OPEN END
SEALED END
OPEN END
Press Vac/Seal Button
See Owner's Manual for full instructions and safeguards.
p. 1
Press Lid Release Buttons
VS1200_23EFSQSG1 (digital) QSG.indd 1VS1200_23EFSQSG1 (digital) QSG.indd 1 2023/1/5 10:512023/1/5 10:51
To Next Page
Need help?
General
