MAKE A FOODSAVER
®
BAG:
1. Open lid and place roll into
Roll Storage.
2. Lift up Roll Cutter Bar and
place bag material beneath
the Cutter Bar. Pull bag
material to edge until it is
on top of the Sealing Strip
and close lid.
3. Turn Easy Lock Latch to the
Operate position and press
the Seal Button. When the
Seal Indicator Light turns
off, sealing is complete.
4. Turn Easy Lock Latch to the
Open position, open lid
and pull bag material out to
desired length.
5. Slide Bag Cutter across
Cutter Bar.
HOW TO:
Español
p. 3
Français
p. 2
VS2100 SERIES QUICK START GUIDE
FoodSaver
®
Select Vacuum Sealer
VACUUM SEAL FOODSAVER
®
ZIPPER BAGS:
1. Prepare zipper bags
according to FoodSaver
®
Accessory Guidelines,
which are included with
accessory purchases. For
zipper bags, make sure
not to put any food under
the valve and press zipper
closed with nger while bag is lying down on a at
surface.
2. Turn Latch to Operate position.
3. Insert one end of Accessory Hose into Accessory Port
on Appliance. Place Handheld Sealer on Zipper Bag
valve.
4. Press Mode Button until the Indicator Light next to
Dry is illuminated. Then press Vacuum Button.
Zipper bags are safe for pantry and fridge use only.
VACUUM SEAL A FOODSAVER
®
BAG:
1. Turn Latch to Open position
and open lid.
2. Place item(s) in bag, allowing
at least 3 inches (7.62 cm)
of space between contents
and open end of bag. Place
open end of bag into Vacuum
Channel (Drip Tray) and close
lid.
3. Turn Latch to Operate
position.
4. Press Vacuum Button to begin
vacuum and sealing process
of open end of bag. Motor
will continue to run until bag
is fully vacuumed, then will
automatically seal.
5. When Seal Indicator Light
stops ashing and becomes
constant, turn Latch to
Open position, and open lid.
Remove bag.
Refrigerate, freeze or store as
needed.
VACUUM SEAL FOODSAVER
®
CONTAINERS:
(sold separately)
1. Prepare FoodSaver
®
Preserve & Marinate
Container according to
Guidelines, which are
included with container
purchase.
2. Turn Latch to Operate
position.
3. Insert one end of Accessory Hose into Accessory Port
on Appliance. Place Handheld Sealer on Container valve.
4. Press Vacuum Button.
To release vacuum and open, turn knob on lid to Open.
See Owner's Manual for full instructions and safeguards.
p. 1
Close and slide Lock Latch to
Operate position
Place Bag on Sealing Strip
Press Seal Button
OPEN END
SEALED END
Place Bag in Vacuum Channel
Close and Latch Lid
Press Vacuum Button
VS2100_22EFSQSG1 (digital).indd 1VS2100_22EFSQSG1 (digital).indd 1 2022/3/23 9:43 AM2022/3/23 9:43 AM
To Next Page
Need help?
General
