fall
indicators
identity
label
dorsal
attachment
D-ring
IDENTITY CARD
PERIODIC EXAMINATION AND REPAIR HISTORY
1
2
DATE
REASON FOR
ENTRY PERIODIC EXAMINATION
OR REPAIR
3
4
SERIAL NUMBER
USER NAME
DATE OF MANUF.
DATE OF PURCHASE
IT IS THE RESPONSIBILITY OF THE USER ORGANISATION TO PROVIDE THE IDENTITY CARD AND TO FILL IN THE DETAILS REQUIRED.
THE IDENTITY CARD SHOULD BE FILLED IN BEFORE THE FIRST USE BY A COMPETENT PERSON, RESPONSIBLE INTHE USER ORGANIZATION FOR PROTECTIVE EQUIPMENT.
ANY INFORMATION ABOUT THE EQUIPMENT LIKE PERIODIC INSPECTIONS, REPAIRS, REASONS OF EQUIPMENT'S WITHDRAWN FROM USE SHALL BE NOTED
NTO THE IDENTITY CARD BY A COMPETENT PERSON. THE IDENTITY CARD SHOULD BE STORAGED DURING A WHOLE PERIOD OF EQUIPMENT UTILIZATION.
DO NOT USE THE EQUIPMENT WITHOUT THE IDENTITY CARD. ALL RECORDS IN THE IDENTITY CARD CAN BE FILLED IN ONLY BY A COMPETENT PERSON.
MODEL AND TYPE OF EQUIPMENT
REF. NUMBER
DEFECTS NOTED,
REPAIRS CARRIED OUT
AND OTHER REVELANT INFORMATIONS
NAME AND SIGNATURE
OF COMPETENT PERSON
PERIODIC
EXAMINATION
NEXT DUE DATE
EN 358:1999
Ref.: AB 110 04
Instruction Manual
READ CAREFULLY BEFORE USE
THE EQUIPMENT
SAFETY
HARNESS
PRO
shoulder
strap
chest strap
connecting
buckle
shoulder
adjustment
buckle
tool
holder
leg strap
connecting
buckle
leg strap
chest strap
shoulder
strap
chest strap
connecting
buckle
shoulder
adjustment
buckle
tool
holder
leg strap
connecting
buckle
leg strap
chest strap
fall
indicators
identity
label
identity
label
dorsal
attachment
D-ring
shoulder
strap
tool
holder
shoulder strap
adjustment
buckle
chest strap
connecting
buckle
chest strap
frontal
attachment
loops
work positioning
belt attachment
D-rings
work positioning
connecting buckle
leg strap
connecting
buckle
leg strap
shoulder
strap
tool
holder
shoulder strap
adjustment
buckle
chest strap
connecting
buckle
chest strap
frontal
attachment
loops
work positioning belt
connecting buckle
work positioning
belt attachment
D-rings
leg strap
connecting
buckle
leg strap
DATE OF PUTTING INTO OPERATION
The safety harnesses P-12PRO/P-22PRO/P-32PRO/P52-PRO are a basic component of personal protective equipment against falls from a height. The
harnesses comply with EN 361 (fulll body harness). The harnesses P-22PRO and P52PRO are equipped additionally with work positioning belt which
comply with EN 358 (belts for work positioning and restraint). The harnesse are made of polyamide webbing. The buckles are made of aluminium.
The harnesses are made of two sizes: universal M-XL and extra large XXL.
EN 361:2002
P-12PRO Ref. AB 112 01 P-22PRO Ref. AB 122 01
P-32PRO Ref. AB 132 01 P-52PRO Ref. AB 152 01
SAFETY HARNESS
Ref. AB 152 01
Size:
Date
of manufacture: 03/2018
Serial
number: 0000001
M-XL
EN 361:2002
P-52PRO
CONTENT OF HARNESS IDENTITY LABEL
number of the manufacturing series
CE marking and number of a notified body
controlling manufacturing of the equipment (art. 11)
type of the device
reference number
month/year of the device manufacture
marking of the manufacturer
or distributor
trade mark of the device
size
caution: read the manual
number / year of the European standards
the equipment conform
EN 358:1999
Don’t use
the harness with
damaged or lacking
fall indicator
OK !
DON'T
USE !!!
!
SafetyLiftinGear.com
Unit R1D Rockingham Gate Poplar Way
West Cabot Park Bristol BS11 0YW
Tel: 0808 123 69 69 Fax: 0117 9381 602
sales@safetyliftingear.com
Notified body, at which the European certification was Iissued
and which supervises the production of the equipment:
APAVE SUDEUROPE SAS - 8 rue Jean-Jacques Vernazza -
CS-60193 – 13322 MARSEILLE Cedex 16, France - No. 0082
PRODUCENT: PROTEKT, 93-403 LODZ, ul. Starorudzka 9, POLAND,
TEL: (48 42) 680 20 83, FAX: (48 42) 680 20 93, www.protekt.com.pl
Periodic inspections
The safety harness must be inspected at least once every 12 months from the date of first use.
Periodic inspections must only be carried out by a competent person who has the knowledge and training required for personal
protective equipment periodic inspections. Depending upon the type and environment of work, inspections may be needed to be
carried out more frequently than once every 12 months. Every periodic inspection must be recorded in the Identity Card of the
equipment.
Maximum lifespan of the equipment
The maximum lifespan of the harness is 10 years from the date of manufacture.
The harness it fails to pass
inspection or there are any doubt as to its reliability.
ATTENTION: The harness maximum lifetime depends on the intensity of usage and the environment of usage. Using theharness in
rough environment, marine environment, contact with sharp edges, exposure to extreme temperatures or agressive substances, etc.
can lead to the wthdrawal from use even after one use.
must be withdrawn from use immediately and destroyed when it has been used to arrest a fall or
To Next Page
Need help?
General