Force1 Velocity Wave - Boat Battery Installation

FORCE1 RC
10
BOAT BATTERY INSTALLATION
1. Turn the cabin switch either right or left to unlock. Remove the Cabin Cover (Picture 3).
2. Turn 4 switches to unlock the Inner Hatch. Remove the Inner Hatch (Picture 4).
3. Put the Boat Battery into the battery holder of the hull (Picture 5).
4. Connect the battery and power plug (Picture 6).
5. Insert the Inner Hatch at a diagonal angle to the boat body (Picture 7) and lock switches (Picture 8).
6. Insert the Cabin Cover at a diagonal angle to the boat body (Picture 9) and lock the cabin switch (Picture
10).
PICTURE 3
PICTURE 6
PICTURE 4
PICTURE 8PICTURE 7
PICTURE 9
PICTURE 5
PICTURE 10