Installation Guide 1
V20000 G1, V10000 G4R1, V10000
G4R2 10GbE NIC Installation Guide
Cards and appliance models
Installation Guide | 10GbE PCI NIC | v8.4.0 and higher
There are two potential types of 10GbE Fiber cards that will be used to upgrade the
Appliance interfaces:
● Intel X520 2P Adapter (full-height PCI-E)
● Intel X710 2P Adapter (half-height PCI-E)
The V20000 G1 and V10000 G4R2 will use the half-height X710 card for all
interfaces, while the V10000 G4R1 will use the full-height Intel X520 card to replace
the existing P1/P2 2-port copper card, and the half-height Intel X710 card for the E1
and E2 interfaces.
Appliance
Model
P1/P2
Replacement
E1/E2
Replacement
C/N
Replacement
First Supported
Release
V10000
G4R1
X520 Full-height X710 Half-height Not applicable 8.4.0
V10000
G4R2
X710 Half-height X710 Half-height Not applicable 8.4.0
V20000
G1
X710 Half-height X710 Half-height X710 Half-height 8.5.0 (P1/P2 and E1/E2
replacement)
8.5.3 (C/N replacement)
To Next Page
Need help?
General
