160
[MC23600(ALL)01/96]
4. Check the fluid level on the reservoir. The
fluid level should be at the F (Full) line on
the reservoir.
[MC23700(ALL)01/96]
one third page art:0032225-B
Where to check the power steering fluid
[MC23800(ALL)01/96]
5. If the power steering fluid is low, add fluid
in small amounts, continuously checking the
level, until you reach the F (Full) line. Do
not overfill.
*
[MC23900(ALL)01/96]
If the power steering fluid is low, do not drive
your vehicle for a long period of time before
adding fluid. This can damage the power
steering pump.
*
[MC23950(ALL)04/96]
If you must check the power steering fluid
before it reaches normal operating temperature,
make sure that the fluid reaches the “L” (LOW)
line range in the reservoir. The reading will only
be accurate if the fluid temperature is
approximately 70˚ to 100˚F (21˚ to 38˚C).
File:11icmcf.ex
Update:Tue Mar 4 08:57:16 1997
To Next Page
Loading...
