Ford 1997 Aspire - Adjusting the tone balance and speaker output of your radio

23
*
[AS23000(ALL)08/95]
Follow the easy steps below to set these buttons
to the desired frequencies:
*
[AS23500(ALL)03/96]
1. Select a band, then select a frequency.
*
[AS23700(ALL)10/95]
2. Press one of the memory preset buttons and
hold the button until the sound returns. That
station is now held in memory on that
button.
*
[AS23800(ALL)10/95]
3. Follow the two steps above for each station
memory preset button you want to set.
*
[AS24000(ALL)10/95]
Adjusting the tone balance and speaker
output of your radio
[AS24200(ALL)02/96]
❑
Increasing or decreasing the bass response
[AS24300(ALL)03/96]
Push the “SELECT” button repeatedly until
the display reads “BASS.” Push the right (+)
side of the “VOL” button to increase bass,
and push the left (S) side to decrease bass.
*
[AS24400(ALL)02/96]
❑
Increasing or decreasing treble response
[AS24500(ALL)02/96]
Push the “SELECT” button repeatedly until
the display reads “TREB.” Push the right (+)
side of the “VOL” button to increase treble,
and push the left (S) side to decrease treble.
*
[AS24600(ALL)02/96]
❑
Adjusting speaker balance
[AS24700(ALL)04/96]
Balance control allows you to adjust the
sound distribution between the right and left
speakers. Push the “SELECT” button
repeatedly until the display reads “BAL.”
Push the right (+) side of the “VOL” button
to shift the sound to the right speaker, and
push the left (S) side to shift the sound to
the left speaker.
File:04icasf.ex
Update:Tue Mar 4 08:51:43 1997