Continue until the lift mechanism
“clicks.”
4. Check that the tire is tightly
seated under the vehicle by
pushing against tire. Retighten as
necessary.
5. Replace the access cover,
anti-theft bracket and thumb
screw. Use finger pressure only to
secure the thumb screw.
Make sure the spare tire
and jacking equipment are
stowed and secured in the
proper storage location.
Never run the engine with
one wheel off the ground.
Preparing to change the tire
1. Make sure your vehicle will not
move or roll.
• Put the gearshift in P (Park)
D
PRN 21
eco_preparing_tire_change
Roadside emergencies
114
To Next Page
Loading...
