Replacing the tire
1. Assemble the jack handle sections together and lock into jack. Use the
jack handle to slide the jack under the vehicle.
To lessen the risk of personal injury, do not put any part of your
body under the vehicle while changing a tire. Do not start the
engine when your vehicle is on the jack. The jack is only meant for
changing the tire.
2. Position the jack to raise the front or rear wheel.
• Never use the front or rear
differential as a jacking point.
Rear axle jacking points:
• All models except E-Super Duty
Roadside emergencies
88
To Next Page
Loading...
