To stow the full size flat tire in the
cargo floor, the long spare tire rod
in the tool bag needs to be installed.
11. Using the lug wrench, remove
the spare tire rod from the cargo
floor and install the longer spare tire
rod.
12. Put flat tire and tool bag with
jack handle, lug nut wrench and
spare tire rod away. Make sure jack
is fastened so it does not rattle
when you drive.
The cargo cover can not be
reattached to the back seat clips
when a full size tire is stowed.
13. Install cargo cover over the flat
tire and secure with the plastic nut.
14. Unblock the wheels.
Removing the jack and tools
The jack and tools are located in the
right rear of the cargo area behind
an access panel.
2004 Escape (204)
Owners Guide (post-2002-fmt)
USA English (fus)
Roadside Emergencies
165
To Next Page
Loading...
