Fluid Ford Part
Name
Application Capacity
Rear axle
lubricant
Motorcraft SAE
80W-90
Premium Rear
Axle Lubricant
4X4 2.96 pints (1.4L)
5
Windshield
washer fluid
Motorcraft
Premium
Windshield
Washer
Concentrate
All 2.7 quarts
(2.6L)
1
Ensure the correct automatic transmission fluid is used.
Transmission fluid requirements are indicated on the dipstick
blade. MERCON威 and MERCON威 V are not interchangeable. DO
NOT mix MERCON威 and MERCON威 V. Refer to your scheduled
maintenance information to determine the correct service
interval.
2
Service refill capacity is determined by filling the transmission to the
bottom of the filler hole with the vehicle on a level surface.
3
Indicates only approximate dry-fill capacity. Some applications may vary
based on cooler size and if equipped with an in-tank cooler. The amount
of transmission fluid and fluid level should be set by the indication on
the dipstick’s normal operating range.
4
Add the coolant type originally equipped in your vehicle.
5
Fill to 1/4 inch to 9/16 inch (6 mm to 14 mm) below bottom of fill hole.
6
Use of synthetic or synthetic blend motor oil is not mandatory. Engine
oil need only meet the requirements of Ford specification
WSS-M2C930-A and the API Certification mark.
2005 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Maintenance and Specifications
277
To Next Page
Loading...
