Ford 2006 Ranger User Manual

Replacing tail lamp/backup lamp bulbs
1. Make sure the headlamp switch is
in the OFF position and the open
the tailgate to expose the lamp
assemblies.
2. Remove the four screws and the
lamp assembly from vehicle.
3. Rotate bulb socket
counterclockwise turn and remove
from lamp assembly.
4. Carefully pull the bulb straight
out of the socket
Install the new bulb(s) in reverse order.
2007 Ranger (ran)
Owners Guide (post-2002-fmt)
USA (fus)
Lights
62

Ford 2006 Ranger Specifications

General

Brand	Ford
Model	2006 Ranger
Category	Automobile
Language	English