Ford 2007 Escape - To Reinstall the Cross-Bar Assembly (if Equipped) to the Roof Rack Side Rails

To reinstall the cross-bar assembly (if equipped) to the roof rack
side rails:
1. Ensure that both cross-bar
assemblies are installed with the F
(front) arrow facing towards the
front of the vehicle.
2. Use a long, flat object to depress
the tongue in the endcaps on both
sides of the cross-bar.
3. Slide the cross-bar assemblies
over the end cap tongue and into
the side rails.
4. Tighten thumbwheel at both ends
of the cross-bar.
2007 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
74