Resuming a set speed
Press RES and release it. This will
automatically return the vehicle to
the previously set speed.
Increasing speed while using speed control
There are two ways to set a higher
speed:
• Press and hold SET + until you
get to the desired speed, then
release the control. You can also
use the SET + control to operate
the Tap-Up function. Press and
release this control to increase
the vehicle set speed in small
amounts by 1 mph (1.6 km/h).
• Use the accelerator pedal to get to the desired speed. When the
vehicle reaches that speed, press and release the SET + control.
Reducing speed while using speed control
There are two ways to reduce a set
speed:
• Press and hold – until you get to
the desired speed, then release
the control. You can also use the
– control to operate the
Tap-Down function. Press and
release – to decrease the vehicle
set speed in small amounts by
1 mph (1.6 km/h).
SET
RES
Driver Controls
56
2010 Transit Connect (tst)
Owners Guide (own2002), 1st Printing
USA (fus)
To Next Page
Loading...
Need help?
General
