The autounlock feature will unlock all the doors when:
• autolock has locked the doors
• you stop the vehicle and switch the ignition off or to accessory mode,
and
• the driver’s door is opened within 10 minutes.
Note: The doors will not autounlock if you have electronically locked
them before opening the driver’s door.
Enabling or Disabling Autolock and Autounlock
Note: Your authorized dealer can perform this procedure, or you can do
the procedure yourself.
To enable or disable these features, do the following:
Note: You will have 30 seconds to complete the procedure.
1. Switch the ignition on.
2. Press the power door unlock button three times.
3. Switch the ignition off.
4. Press the power door unlock button three times.
5. Switch the ignition on. The horn will chirp indicating the programming
mode has been entered.
Autolock: Press the power door unlock control, then the lock control.
The horn will chirp once if autolock was disabled or twice (one short and
one long chirp) if autolock was enabled.
Autounlock: Press the power door lock control, then the unlock control.
The horn will chirp once if autounlock was disabled or twice (one short
and one long chirp) if autounlock was enabled.
6. Switch the ignition off. The horn will chirp once to confirm the
procedure is complete.
Note: The autounlock feature can be enabled or disabled independently
of the autolock feature.
74 Locks
2013 C-Max Full Hybrid (34h)
Owners Guide gf, 2nd Printing
USA (fus)
To Next Page
Loading...
Need help?
General
