• Inflatable safety belt buckle
5. To put the retractor in the automatic locking mode, do the following;
• Standard safety belt: grasp the
shoulder portion of the belt and
pull downward until all of the belt
is pulled out.
• Inflatable safety belt: grasp the lap
portion of the inflatable safety belt
and pull upward until all of the belt
is pulled out.
Note: Unlike the standard safety belt, the inflatable safety belt’s unique
lap portion locks the child seat for installation. The ability for the
shoulder portion of the belt to move freely is normal, even after the lap
belt has been put into the automatic locking mode.
Child Safety 27
2013 Flex (471)
Owners Guide gf, 1st Printing
USA (fus)
To Next Page
Loading...
