2. Go to the front of the vehicle and
locate the secondary release lever,
which is located under the front of the
hood, to your right of the center of the
vehicle (driver's side), toward the
headlight.
3. Release the hood latch by pushing the
secondary release lever to your left,
toward the center of the vehicle.
4. Raise the hood and support it with the
prop rod.
5. To close the hood, lower and secure
the prop rod in the clip.
6. Lower the hood and allow it to drop the
last 8 to 11 inches (20 to 30
centimeters).
Note: Make sure that the hood is closed
properly.
242
Fusion/Mondeo (CC7)
Maintenance
To Next Page
Loading...
