EasyManua.ls Logo

Ford 2014 MUSTANG - Parking Brake Operation; Traction Control System

Ford 2014 MUSTANG
461 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
HINTS ON DRIVING WITH ANTI-LOCK BRAKES
When the system is operating, the brake pedal will pulse and may travel
further. Maintain pressure on the brake pedal. You may also hear a noise
from the system. This is normal.
The anti-lock braking system will not eliminate the dangers inherent
when:
you drive too closely to the vehicle in front of you.
your vehicle is hydroplaning.
you take corners too fast.
the road surface is poor.
PARKING BRAKE
WARNING: If the parking brake is fully released, but the brake
warning lamp remains illuminated, the brakes may not be
working properly. See your authorized dealer as soon as possible.
WARNING: Always set the parking brake fully and make sure
that the transmission selector lever is securely latched in position
P (automatic transmission) or position 1 (manual transmission).
To set the parking brake, pull the parking brake handle up as far as
possible.
To release the parking brake:
1. Press and hold the button located at the end of the parking brake
handle.
2. Pull the handle up slightly, then push the handle down.
180 Brakes
2014 05+ Mustang (197)
Owners Guide gf, 1st Printing, November 2012
USA (fus)

Table of Contents

Related product manuals