The tether strap anchors in your
vehicle are in the following positions
(shown from top view):
Perform the following steps to attach a child safety seat to the tether
anchor:
For coupe:
1. Route the tether strap over the top of the head restraint.
2. Locate the correct anchor for the
selected seating position.
3. Open the tether anchor cover.
4. Clip the tether strap to the
anchor as shown.
If the tether strap is clipped
incorrectly, the child safety seat
may not be retained properly in the
event of a collision.
5. Tighten the child safety seat tether strap according to the
manufacturer’s instructions.
If the safety seat is not anchored properly, the risk of a child being
injured in a collision greatly increases.
30 Child Safety
2014 05+ Mustang (197)
Owners Guide gf, 1st Printing, November 2012
USA (fus)
To Next Page
Loading...
