Comfort
continued
*if equipped
Memory Function*
The memory function allows a “one-touch”
recall of personalized memory features like
the positions of the driver seat and power
mirrors. Use the memory controls located on
the driver’s door to program and then recall
memory positions.
To program position 1, press and hold the 1 button until you
hear a tone. Use this same procedure to set positions 2
and 3 using the respective buttons. You can now use
these controls to recall the set memory positions.
Tilting Front-row Head Restraints
Tilt the head restraint forward for additional comfort by
gently pulling the top of the head restraint. Once it is in
the forward-most position, tilting it forward once more
releases it to the upright position.
Note: Do not attempt to
force the head restraint
backward aer it is tilted.
Instead, continue tilting
it forward until the head
restraint releases to the
upright position.
*if equipped
13
Panoramic Vista Roof
®
and Power Sunscreen*
The moonroof and sunscreen controls are on the overhead
console. Both features have a “one-touch” opening and
closing operation.
Press and release the following controls:
• Sunscreen: The rear of the control opens the sunshade,
while the front of the control closes it.
Note: If the moonroof is open, it closes automatically
before the sunscreen.
• Moonroof: The rear of the control opens the sunscreen
and moonroof. The front of the control closes the
moonroof glass panel.
To Next Page
Loading...
Need help?
General
