Ford 2015 ESCAPE Quick Reference Guide

Manual Ligate
To Open the Ligate
1. Unlock all the vehicle doors.
2. Press the button located inside the ligate pull-cup
handle to unlatch the ligate.
3. Pull on the outside handle to raise the ligate.
Power Ligate*
Note: If the vehicle is running,the ligate operates only
with the transmission in park (P).
Touch a button to open or close the ligate:
Press
twice within three seconds on your remote entry
transmitter or the
button on the instrument panel. A
tone sounds when the ligate starts to move.
You Can Also Open the
Ligate from the Rear of
Your Vehicle
1. Make sure you unlock
your lifgate first and
then press the button
located in the top of the
ligate pull-cup handle.
2. Allow the power system
to open the ligate aer
pressing the control.
3. To close, press and
release the control
pictured below.
When the ligate begins to
move, a tone sounds.
Setting the Ligate
Open Height
Once you open the power
ligate, you can move
it manually to a desired
height. If the previously
programmed ligate height
is lower than the fully
opened position, you can
manually push it upward.
To Program a New Height
1. Open the ligate.
2. Manually move the
ligate to your
desired height.
3. Press and hold the
control button on the
ligate until you hear
a tone, indicating that
your programming of
the ligate height
is successful.
The ligate then opens
to its newly programmed
height when you use the
power feature to open it.
To change the
programmed height,
repeat the process above.
14
*if equipped
Ligate

Ford 2015 ESCAPE Specifications

General

Brand	Ford
Model	2015 ESCAPE
Category	Automobile
Language	English