Playback and format
• The videocassette player of your AutoVision威 system can only be used
in the “playback” mode. You are not able to record with your system.
• The system plays standard videocassettes marked “VHS” (or “S-VHS).
VCP protection circuits
Tape protection circuit
• When the system is in PAUSE mode, the tape mechanism will
continue to create tension on the tape.
• When the VCP is in still playback, FFWD (fast forward) or REW
(reverse) mode for more than five minutes, the tape protection circuit
automatically returns the system to PLAY mode to avoid damage to
the tape.
Your AutoVision System is also equipped with a Dew sensor circuit and a
High/low temperature sensor circuit. For more information on these
circuits, please refer to Humidity and moisture condensation and
Temperature extremes in this chapter.
VCP controls
1. LED display
The display lamp will light up in green when power is supplied to the
videocassette player.
1 8
3
5 4 6 7
2
Entertainment Systems
32
To Next Page
Loading...
Need help?
General
