To Next Page

To Previous Page

Reducing speed while using speed control

There are two ways to reduce a set

speed:

• Press and hold the COAST

control until you get to the

desired speed, then release the

control. You can also use the

COAST control to operate the

Tap-Down function. Press and

release this control to decrease the vehicle set speed in small amounts

by 1.6 km/h (1 mph).

• Depress the brake pedal until the

desired vehicle speed is reached,

press the SET ACCEL control.

Turning off speed control

There are two ways to turn off the speed control:

• Depress the brake pedal or the clutch pedal (if equipped). This will

not erase your vehicles previously set speed.

• Press the speed control OFF

control.

Note: When you turn off the speed

control or the ignition, your speed

control set speed memory is erased.

Indicator light (if equipped)

This light comes on when either the

SET ACCEL or RES controls are

pressed. It turns off when the speed

control OFF control is pressed, the

brake is applied or the ignition is

turned to the OFF position.

RES

SET

ACCEL

COAST

RES

SET

ACCEL

COAST

Driver Controls

Ford Automobile Owner's Manual

Other manuals for Ford Automobile