To Next PageTo Next Page
Need help?Do you have a question about the Ford BRONCO 1966 and is the answer not in the manual?
General| Brand | Ford |
|---|---|
| Model | BRONCO 1966 |
| Category | Automobile |
| Language | English |
Area to record essential tune-up data for the vehicle.
Section for logging various fluid and component capacities.
Space to record part numbers for common replacement items.
Guides the user on how to effectively utilize the repair manual's sections.
Lists essential tools and equipment required for vehicle maintenance and tune-up procedures.
Provides critical safety precautions and practices for working on the vehicle.
Details specialized tools that may be needed for specific repair tasks.
Background information on the Ford Bronco model development and changes.
Explains how to locate and interpret the vehicle's serial number for identification.
Details the VIN plate location and its significance for vehicle identification.
Lists and explains engine identification codes used for different model years and engine types.
Information on locating transmission identification numbers.
Provides a chart of rear axle codes and their corresponding gear ratios.
Outlines regular maintenance tasks to keep the vehicle in optimal operating condition.
Details procedures for servicing both oil bath and dry-type air cleaners.
Details how to check, clean, or replace the PCV valve.
Explains inspection of the evaporative emission control canister.
Describes how to check and adjust drive belt tension.
Procedures for checking and servicing the heat riser valve.
Information on wiper refill replacement and blade care.
Detailed steps for replacing wiper blade refills.
Describes the procedure for checking and maintaining the engine oil level.
Details how to check fluid levels in automatic and manual transmissions.
Covers inspection of the cooling system for leaks and component wear.
Instructions for checking the radiator cap for damage or wear.
Guidance on clearing debris from radiator fins for optimal cooling.
Highlights hazards associated with refrigerant gas and system servicing.
Steps for testing the coolant's anti-freeze protection level.
Information on the front hub assembly, particularly for vehicles with locking hubs.
Detailed procedures for cleaning, inspecting, and repacking front wheel bearings.
Step-by-step guide for servicing front wheel bearings on non-free-running hub models.
Instructions for checking and maintaining battery fluid levels.
Provides a step-by-step guide for safely jump-starting a vehicle with a dead battery.
Lists essential precautions to prevent accidents during jump starting procedures.
Diagrams illustrating proper tire rotation patterns for different tire types.
Guidance on inspecting tires for damage and proper replacement procedures.
Instructions for replacing the inline fuel filter.
Explains the correct procedures for push-starting and towing the vehicle.
Details safe methods for lifting and supporting the vehicle for service.
Provides guidance on recommended oils and lubricants for the vehicle.
Step-by-step guide for changing engine oil and filter.
Procedures for checking and changing manual transmission lubricant.
Information on checking and replacing automatic transmission fluid.
Steps for servicing the C6 automatic transmission, including fluid changes.
Guidelines for greasing chassis components based on maintenance schedules.
A comprehensive chart listing fluid capacities for various vehicle systems.
Outlines maintenance intervals and service items for 1966-72 models.
Details maintenance intervals and service items for 1973-74 models.
Outlines maintenance intervals and service items for 1975-77 models.
Lists maintenance intervals and service items for 1978-79 models.
Maintenance intervals for 1980-81 US and Canadian unleaded fuel vehicles.
Maintenance schedule for 1980-81 Canadian 302 V8 models with leaded fuel.
