CPR © 2021 FORD MOTOR COMPANY
DEARBORN, MICHIGAN 48121
12/2021
Page 12 of 22
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
9. NOTE: The tab must be depressed prior to pushing the connector back in or damage to the
connector may result.
Depress the tab while pulling the connector until the hole is completely visible on the top of the connector.
10. Insert a suitable tool inside the connector hole to prevent the connector from closing.
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
11. Wait a minimum of 5 minutes.
7. Detach the pin-type retainer and position the electrical connector and wiring harness aside.
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
8. Release the Connector Position Assurance (CPA) clip.
PLACE COPY HERE
PLACE COPY HERE
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT
STUD FOR
MISSING NUT