Overview
• The 360-Degree Camera with Split-View Display provides the driver a view of
what is directly in front of or behind the vehicle, as well as cross-traffic views in
front of and behind the vehicle
• In addition, the driver can see a top-down view of the area outside the vehicle,
including blind spots.
• The system uses cameras mounted in the front grille, near the tailgate or
liftgate handle, and sideview mirrors to give the driver a continuous view of
everything around the vehicle. It can also include front and/or rear
camera washers
How to switch the camera on/off
• The 360-degree camera system button is on the instrument panel.
How it works
The Split-View Display allows drivers to toggle through different camera views by
pressing the camera button on or near the touchscreen.
• When in Park, Neutral or Drive, only the front images will be displayed when the
hard button is pressed
• When in Reverse, only the rear images will be displayed when the button
is pressed
• The Keep Out Zone shown on the center-stack screen is represented by the
yellow dotted lines running parallel to the vehicle and is designed to provide a
view on the ground of the fully extended outside mirror position
360-Degree Camera
E-Transit – Key Driver Features
14
To Next Page
Loading...
