Transaxle
1. Remove the battery and the battery tray. For additional information, refer to Section 414-01.
2. Disconnect the breather tube and mass air flow (MAF) sensor.
3. Remove the intake tube and air cleaner cover.
4. Remove the air cleaner assembly.
SECTION 307-01: Automatic Transaxle/Transmission 2001 Escape Workshop Manual
REMOVAL
Procedure revision date: 04/04/2001
Special Tool(s)
Adapter for 303-290A (Support Leg)
303-290A-03A
Holding Fixture, Flexible Exhaust Pipe
309-001 (T94T-6000-AH) (25-001)
Support Bar, Engine
303-290A
Lifting Bracket, Engine
303-050 (T70P-6000)
Adapters for 303-290
303-290A-01
Engine Lifting Chains (Part of Spreader Bar)
303-D089 (D93P-6001-A3) or equivalent
Retainer, Torque Converter
307-346 (T97T-7902-A)
2001 Escape Workshop Manual
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS1K/~MUS~LEN/19/S
To Next Page
Need help?
General
