Ford Escape 2008 - Compass Zone Adjustment

Compass zone adjustment
1. Determine which magnetic zone
you are in for your geographic
location by referring to the zone
map.
2. Turn ignition to the ON position.
3. Locate the reset button on top of
the compass sensor mounted behind
the mirror.
4. Press and hold the reset button
on the compass module for
approximately 5 seconds until ZONE
XX appears in the center stack
display.
5. Continue to press the reset button until the correct zone appears in
the center stack display.
6. The direction will display after
the button is released. The zone is
now updated.
123
4
5
6 7 8 9 1011
12
13
14
15
2008 Escape (204)
Owners Guide (post-2002-fmt)
USA (fus)
Driver Controls
59