Ford Escape 2010 - Underhood Dimensions

Item
Description
Specification
Flushness Specification
12
Liftgate to rear fascia
8.0 mm (0.31 in) ± 3.0 mm (0.11 in)
—
13
Liftgate-to-tail lamp assembly
6.0 mm (0.23 in) ± 2.0 mm (0.07 in)
0.0 mm ( in) ± 3.9 mm (0.153 in)
14
Lifgate to roof
9.0 mm (0.35 in) ± 2.0 mm (0.07 in)
2.0 mm (0.078 in) ± 1.4 mm (0.055 in)
15
Liftgate to D-pillar
6.0 mm (0.23 in) ± 2.5 mm (0.09 in)
2.0 mm (0.078 in) ± 2.1 mm (0.082 in)
16
Tail lamp assembly to body side
2.0 mm (0.07 in) ± 1.8 mm (0.07 in)
1.5 mm (0.059 in) ± 1.8 mm (0.07 in)
17
Fascia to body side
0.5 mm (0.01 in) ± 1.2 mm (0.04 in)
0.5 mm (0.019 in) ± 2.6 mm (0.102 in)
18
Tail lamp assembly to fascia
4.0 mm (0.15 in) ± 2.5 mm (0.09 in)
—
Underhood Dimensions
NOTE: The following dimensional illustrations are common for Ford Escape and Mercury Mariner.
NOTE: Measurements are obtained on center, unless otherwise indicated.