EasyManua.ls Logo

Ford Escape 2016 - Instrument Panel; Cruise Control; Service Engine Soon Light; Information Display

Ford Escape 2016
10 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Instrument Panel
1
3
2
4
5
6
7
4 5
9
1
Cruise Control
To Set Your Cruise
Control Speed
A. Press and release ON.
B. Accelerate to the
desired speed.
C. Press and release SET +,
then take your foot o
the accelerator.
Aer you set a speed, you can
press SET + or SET - to adjust
cruise speed. To cancel the set
speed, pull the CAN (Cancel)
control toward you or tap the
brake pedal.
2
Service Engine
Soon Light
Lights briefly when
you switch on the ignition.
If it remains on or is flashing
aer you start the engine,
the On-Board Diagnostics
(OBD-II) system has
detected a problem. Drive in a
moderate fashion and contact
your authorized dealer as
soon as possible.
3
Information Display
Provides information about
various systems on your
vehicle. Use the le, 5-way
controls located on the
steering wheel to choose
and confirm settings and
messages. Refer to the
Information Displays chapter
of your Owner’s Manual for
more information.
4
Tilt and Telescope
Steering Column
Unlock the steering wheel by
pulling the lever down. Adjust
the wheel to the desired
position (in, out, up and
down). Push the lever back
up to lock the steering wheel
in place.
5
Media Controls*
Press + to increase or -
to decrease volume levels.
Press |⊳⊳ ⊲⊲| to hear the
next or previous saved radio
station, CD or MP3 track.
Press and hold to seek up or
down the frequency band, or
through CD and MP3 tracks.
6
Voice Controls*
Press to access
voice recognition.
Press the phone button to
answer an incoming call.
Press and hold to exit
phone mode or end
a call.
7
Wiper Controls
Use the rotary control on
the lever to adjust the wipe
intervals. Pull the lever toward
you to wash the windshield.
8
Push Button Start*
Allows you to start your
vehicle by pressing the START
STOP button while fully
pressing down on the brake
pedal. Press the button again
to switch o the engine.
Note: Your intelligent access
transmitter* must be inside the
vehicle to start the ignition.
9
Hazard Warning
Flasher Control
*if equipped
8

Related product manuals