Ford Expedition 2001 - Ignition Coil and Air System Component Disconnections; Engine-Specific EGR Connections and Manifold Removal

8. Disconnect the eight ignition coil electrical connectors.
9. Remove the brake booster bracket and tube.
1. Remove the nut.
2. Release and move the two hose clamps.
3. Remove the brake booster tube.
10. Remove the positive crankcase ventilation (PCV) hose.
For vehicles equipped with 4.6L engine
11. Disconnect the differential pressure feedback exhaust gas recirculation (EGR) connector, then disconnect the upper and lower EGR valve tube fitting.
Page
2
of
7
2001 Expedition/Navigator Workshop Manual
11/6/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS1J/~MUS~LEN/20/S
...