Ford Expedition 2001 - Fuel Injector and Manifold Reassembly Preparation

For vehicles equipped with 5.4L engine
12. Disconnect the differential pressure feedback exhaust gas recirculation (EGR), then disconnect the upper and lower EGR valve tube fittings.
All vehicles
13. Disconnect the EGR valve vacuum hose.
14. Disconnect the vapor management valve (VMV) hose.
15. Remove the four bolts and lift the fuel injection supply manifold and injectors upward out of intake manifold.
16. Remove the fuel injectors from the fuel injection supply manifold.
Page
3
of
7
2001 Expedition/Navigator Workshop Manual
11/6/2010
http://www.fordtechservice.dealerconnection.com/pubs/content/~WS1J/~MUS~LEN/20/S
...