• Press SET+ or SET- to change the set
speed in small increments.
• Press the accelerator or brake pedal
until you reach the desired speed. Press
SET+ or SET-.
• Press and hold SET+ or SET-. Release
the control when you reach the desired
speed.
Canceling the Set Speed
Press CNCL or tap the brake pedal. The
set speed does not erase.
Resuming the Set Speed
Press RSM.
Switching Cruise Control Off
Note: You erase the set speed when you
switch the system off.
Press OFF when the system is in stand by
mode, or switch the ignition off.
187
Expedition (TB7) Canada/United States of America, enUSA, Edition date: 201604, Third Printing
Cruise Control
To Next Page