Fan speed
Once AUTO is selected, fan speed
is adjusted automatically for
selected temperature conditions.
Override automatic fan speed at
any time by turning the FAN
control up for HI and down for LO
fan speeds. To return to automatic
fan control, press AUTO.
Manual override
If an override control is pressed,
your EATC selection determines
airflow location only. Fan speed
will remain automatic unless the
FAN control is adjusted.
The override controls are located
on the bottom portion of the
EATC.
• MAX A/C — Uses recirculated
air to cool the vehicle. The A/C
compressor is optional.
• VENT — Brings in outside air
through the instrument panel
vents. The A/C compressor is
not optional.
°F
AUTO
FLOOR
OFF
HI
LO
AUTOMATIC
FLR-DEF DEF
uno_manual_override
Controls and features
35
To Next Page
Loading...
