Need help?Do you have a question about the Ford F-1200 and is the answer not in the manual?
Emphasizes reading the manual and following precautions for safe operation.
Explains various international symbols used on tractor controls and instruments.
Details the operation and adjustment of the tractor seat, lights, and engine controls.
Covers the starter switch, fuel gauge, and warning lights on the instrument panel.
Explains the function of the hand throttle, foot throttle, brake pedals, and parking brake control.
Describes operation of gearshift levers, PTO control, four-wheel drive, and differential lock.
Guidelines for the initial 50-hour break-in period to ensure long and dependable tractor service.
Procedures for starting and stopping the tractor engine in various weather conditions.
Covers transmission, four-wheel drive, PTO, and hydraulic lift system operation.
Safety precautions and operating guidance for driving the tractor.
Information on adjusting wheel tread and tire pressures for optimal performance.
Outlines lubrication and maintenance items with their service intervals.
Details recommended fuel types, storage, and lubricant grades.
Steps for engine oil checks, changes, and air cleaner maintenance.
Procedures for fuel filter service and bleeding the fuel system.
Maintenance for the cooling system, thermostat, and fan belt.
Covers battery, alternator, regulator, and fuse maintenance.
Procedures for checking tire pressure and adjusting brakes and clutch.
Recommendations for protecting the tractor during extended storage.
Tables providing torque specifications for various fasteners.
Illustrates ground speeds based on engine RPM and gear selection.
Explains the meaning and location of safety and operational decals.
Checklist for pre-delivery service and adjustments required for the tractor.
Checklist for 50-hour service, adjustments, and performance checks.
To Next Page
General
