FEATURE SETUP
POSITION YOUR TRUCK
AND TRAILER
Read and follow all of these steps carefully to get the best results.
• • Hitch your trailer to the truck and connect the electrical wiring harness. Check
to make sure that the wiring is working.
• • Park your truck and hitched trailer on a level surface.
• • Make sure that the trailer and truck are in line with each other. You can do this
by putting the truck in drive (D) and pulling straight forward.
SETUP OPTIONS
Your 2021 F-150 has two options for Pro Trailer Backup Assist with Trailer Reverse
Guidance setup.
Your vehicle came with a trailer sensor kit. Follow the instructions included with the kit to set up
your trailer. A brief overview of sensor installation begins below.
Your vehicle will be eligible to receive a vehicle system update that will allow trailers to be
set up with the stickers in this kit. Once you receive the update, your display will show Place
Sticker Now during setup instead of Install Sensor Now. Follow the instructions on page 9 to
place the sticker.
To set up a trailer with a sensor aer the vehicle system update, install a sensor on your trailer
and plug it into your vehicle prior to beginning trailer setup on the touchscreen.
SENSOR SETUP
ONE-TIME SETUP
Once you input your trailer’s information into the touchscreen, it is stored for easy recall. That
way, when you want to use the Pro Trailer Backup Assist with Trailer Reverse Guidance system to
help you back your trailer into your desired position, you can choose it from the touchscreen. You
will not have to run through this setup again unless you want to add another trailer. You can store
information for up to 10 trailers within this feature.
5
6
To Next Page
Loading...
