Ford F150 2003 - Page 53

Replacing running board lamp bulbs (if equipped)
The running board bulbs are located
behind the running board.
1. Reach behind the center bracket
of the running board to locate the
bulb.
2. Twist the bulb socket
counterclockwise and carefully pull
to remove it from the lamp
assembly.
3. Pull out the old bulb from the
socket and push in the new bulb.
Install the new bulb in reverse order.
2003 F150 (f12)
Owners Guide (post-2002-fmt)
USA English (fus)
Lights
53
https://www.MyCarManual.com