To Next PageTo Next Page
Need help?Do you have a question about the Ford F150 2011 and is the answer not in the manual?
General| Brand | Ford |
|---|---|
| Model | F150 2011 |
| Category | Automobile |
| Language | English |
This guide details scheduled maintenance to protect against repair costs and increase vehicle value.
Maintenance investment leads to improved reliability, durability, and resale value for the vehicle.
The message center indicates oil change needs; service is due within 2 weeks or 500 miles of the 'REQUIRED' message.
Details engine oil and coolant change intervals for 3.5L, 3.7L, and 5.0L engines based on message center or time.
Details engine oil and coolant change intervals for 6.2L engines based on time or mileage.
Lists essential checks to perform every month: fluid levels, lights, tires, and washer fluid.
Covers checks for battery, drains, cooling system, weatherstrips, hinges, brakes, belts, and wipers.
Lists recommended items for multi-point inspection at every scheduled maintenance interval.
Schedule for changing engine oil and filter, guided by the message center or interval.
Procedure for rotating tires, inspecting wear, and measuring tread depth at regular intervals.
Inspect wheels, U-joints, and axle components for abnormal noise, wear, or looseness.
Recommended performance of a multi-point inspection at each service interval.
Check automatic transmission fluid level if equipped with a dipstick; consult dealer for specific requirements.
Inspect all brake system components including pads, shoes, rotors, drums, linings, hoses, and parking brake.
Check engine cooling system concentration and condition of hoses for optimal performance.
Inspect exhaust system components and heat shields for integrity and potential issues.
Inspect front axle and U-joints for wear and lubricate if equipped with grease fittings.
Inspect half-shaft boots for damage or tears to prevent contamination of U-joints.
Inspect steering, suspension, ball joints, tie-rod ends, driveshaft, and U-joints; lubricate as needed.
Inspect cabin air filter for cleanliness and replace if necessary for air quality.
Replace cabin air filter (if equipped) at 20,000 miles or as needed.
Replace climate-controlled seat filter and engine air filter at 30,000 miles.
Change automatic transmission fluid/filter, check wheel bearings, and inspect accessory drive belts.
Change engine coolant, manual transmission fluid, rear axle fluid, and replace spark plugs.
Services include transmission fluid, axle fluid, transfer case fluid, and drive belt replacement.
Initial engine coolant replacement at 100,000 miles or 72 months, then every 50,000 miles or 36 months.
Change engine oil and filter at specified intervals, guided by the message center.
Rotate tires and inspect wear and tread depth at regular mileage intervals.
Inspect wheels, U-joints, and axle components for abnormal noise, wear, or looseness.
Perform recommended multi-point inspection at every scheduled maintenance interval.
Check automatic transmission fluid level if equipped with dipstick; consult dealer for requirements.
Inspect brake pads, shoes, rotors, drums, linings, hoses, and parking brake.
Check engine cooling system concentration and hoses for optimal performance.
Inspect exhaust system components and heat shields for integrity.
Inspect front axle and U-joints for wear and lubricate if equipped with grease fittings.
Inspect half-shaft boots for damage or tears to protect U-joints.
Inspect steering, suspension, ball joints, tie-rod ends, driveshaft, and U-joints; lubricate as needed.
Inspect cabin air filter for cleanliness and replace if necessary for air quality.
Services include transmission fluid, axle fluid, transfer case fluid, and drive belt replacement.
Initial engine coolant replacement at 100,000 miles or 72 months, then every 50,000 miles or 36 months.
Replace cabin air filter (if equipped) at 15,000 miles or as needed.
Replace climate-controlled seat filter and engine air filter at 30,000 miles.
Change automatic transmission fluid/filter, check wheel bearings, and inspect accessory drive belts.
Change engine coolant, manual transmission fluid, rear axle fluid, and replace spark plugs.
Services include transmission fluid, axle fluid, transfer case fluid, and drive belt replacement.
Initial replacement at 105,000 miles or 72 months; follow-up every 45,000 miles or 36 months.
