Items Capacity
Ford part name or
equivalent
Ford part number / Ford
specification
1
Ford recommends using Motorcraft (Ford) DOT 4 LV High Performance Brake Fluid or
equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may
cause degraded brake performance and not meet the Ford performance standards. Keep brake
fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may
result in brake system damage and possible failure.
2
Approximate dry fill capacity. Actual amount may vary during fluid changes.
3
Automatic transmissions that require MERCON LV should only use MERCON LV fluid. Refer to
scheduled maintenance information to determine the correct service interval. Use of any fluid
other than the recommended fluid may cause transmission damage.
4
See your authorized dealer for fluid level checking or filling.
5
Your engine has been designed to use Motorcraft engine oils or equivalent oils that meet Ford
specifications. It is also acceptable to use an engine oil of recommended viscosity grade that
meets API SN requirements and displays the API Certification Mark for gasoline engines.
6
Do not use supplemental engine oil additives in your engine. They are unnecessary and could
lead to engine damage that is not covered by your Ford warranty.
7
Do not use API category oils labeled as SN, SM, SL or lower category unless the label also
displays the API certification mark. These oils do not meet the requirements of your engine and
emission systems.
8
Add the coolant type originally equipped in your vehicle.
9
See warning below:
WARNING: The air conditioning refrigerant system contains refrigerant R–134a under
high pressure. Opening the air conditioning refrigerant system can cause personal injury.
Air conditioning refrigerant system is to be serviced only by qualified personnel.
Capacities and Specifications 359
2014 Flex (471)
Owners Guide gf, 2nd Printing, November 2013
USA (fus)
To Next Page
Loading...
Need help?
General
