“PHONE”
“Call <name> at home”
1,2
“Call <name> at work” OR “Call <name> in office”
1,2
“Dial”
1,4
“Phone book <name>”
2
“Phone book <name> at work” OR “Phone book <name> at office”
2
“Call history incoming”
2
“Connections”
2
“Go to privacy”
“Hold”
1
These commands do not require you to say “Phone” first.
2
These commands are not available until phone information is completely
downloaded using Bluetooth.
3
See “MENU” table below.
4
See “DIAL” table below.
“MENU”
“(Phone) connections”
*
“(Phone) settings (message) notification off”
*
“(Phone) settings (message) notification on”
*
“(Phone) settings (set) phone ringer”
*
“(Phone) settings (set) ringer 1”
*
“(Phone) settings (set) ringer 2”
*
“(Phone) settings (set) ringer 3”
*
“(Phone) settings (set) ringer off”
*
“Battery”
“Phone name”
“Signal”
“Text message inbox”
*
Words in ( ) are optional and do not have to be spoken for the system
to understand the command.
Phone book commands: When you ask SYNC® to access a phone book
name, number, etc., the requested information appears in the display to
view. Press the phone button and say “Call” to call the contact.
SYNC® 393
2014 Flex (471)
Owners Guide gf, 2nd Printing, November 2013
USA (fus)
To Next Page
Loading...
