EasyManuals Logo

Ford FLEX 2019 User Manual

Ford FLEX 2019
10 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #3 background imageLoading...
Page #3 background image
54
1 POWER ADJUSTABLE STEERING COLUMN*
Use the controls to adjust the steering wheel to your
desired position.
2 CRUISE CONTROL
To Set Your Cruise Control Speed:
1. Press and release ON.
2. Drive to your preferred speed.
3. Press and release SET + or SET – then take your
foot off of the accelerator.
4. After you set a speed, you can press SET +
or SET – to adjust the cruise speed.
To cancel a set speed, press and release CNCL or tap
the brake pedal. To switch off, press OFF or switch the
ignition off.
3 LEFT VEHICLE INFORMATION DISPLAY*
Provides information about various systems on your
vehicle. Use the left information display controls, located
on the steering wheel, to choose and confirm settings
and messages. Refer to the Information Displays
chapter in your Owner’s Manual for more information.
4 SERVICE ENGINE SOON LIGHT
Illuminates briefly when you switch the ignition on.
If it remains on or blinks after you start the engine, the
On-Board Diagnostics system (OBD-II) has detected a
problem. Drive in a moderate fashion and contact your
authorized dealer as soon as possible.
5 RIGHT VEHICLE INFORMATION DISPLAY*
Provides information about various vehicle systems.
Use the right information display controls, located on
your steering wheel, to scroll, highlight and make minor
adjustments within a selected menu.
Refer to the SYNC 3 chapter in your Owner’s Manual
for more information.
6 STEERING WHEEL AUDIO AND
MEDIA CONTROLS
VOL + or Press to increase or to decrease
volume levels.
SEEK or Press to access the previous or next
media selection.
Press to access voice recognition.
Press to connect or disconnect a
phone call.
7 KEYLESS STARTING*
You can start your vehicle by pressing the START STOP
button while fully pressing down on the brake pedal.
Press the button again, without applying the brake, to
switch the engine off. If you leave your vehicle idling for
an extended period of time, the engine shuts down
automatically. Before this happens, a message appears
in the information display, allowing you time to override
the shutdown feature. If you try to leave the vehicle
when it is still on, the horn will sound twice.
Note: A valid key must be inside the vehicle for
the ignition to start.
8 HAZARD CONTROL
1 2 5 6 7
8
3
4
.
54
FLEX
INSTRUMENT PANEL
FLEX
*IF EQUIPPED

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Ford FLEX 2019 and is the answer not in the manual?

Ford FLEX 2019 Specifications

General IconGeneral
BrandFord
ModelFLEX 2019
CategoryAutomobile
LanguageEnglish

Related product manuals