QUICK START
13
Backrest tilt
To tilt the seat, operate lever D
(movement a) and push the backrest
forward to lock (movement b); release
lever D and push the backrest to slide
the seat forward (movement c, applies
only to seats with easy entry).
Driver side, where equipped with
position memory
To return the seat to its initial position,
slide the seat back and press on the
backrest to lock the seat (movement
d); operate lever D (movement e)
and raise the backrest (movement f)
until it clicks home.
ATTENTION Using lever D before
locking the seat in its original position
causes the original seat position to be
lost. In this case, adjust the seat position
by means of the lengthwise adjustment
according to the instructions in
paragraph “Lengthwise adjustment”.
KA00008m
Driver side and passenger side
where not equipped with position
memory
To return the seat to its initial position,
slide the seat back and press on the
backrest to lock the seat (movement
d); operate lever D (movement e)
and raise the backrest (movement f)
until it clicks home. Adjust lengthwise
according to the instructions in
paragraph “Lengthwise adjustment”.
To Next Page
