Ford Ka - Page 39

22
SAFETY
STARTING
AND DRIVING
WARNING
LIGHTS AND
MESSAGES
IN AN
EMERGENCY
SERVICING
AND CARE
TECHNICAL
SPECIFICATIONS
INDEX
KNOWING
YOUR CAR
Warning volume
(Adjusting the failure/
warning buzzer volume)
With this function the volume of
the buzzer which accompanies
the display of any failure/warning can
be adjusted according to 8 levels.
To set the desired volume, proceed
as follows:
– briefly press button : MENU ESC;
the previously set volume “level” will
flash on the display;
– press the button + or − for setting;
– briefly press button MENU ESC
to go back to the menu screen or press
the button for long to go back to
the standard screen without storing
settings.
Adjusting the button volume
(Button Vol.)
This function may be used to adjust
the volume of the beep accompanying
the activation of buttons MENU
ESC,
+ and − can be adjusted according to
8 levels.
To set the desired volume, proceed
as follows:
– briefly press button : MENU
ESC;
the previously set volume “level” will
flash on the display;
– press the button + or − for setting;
– briefly press button MENU
ESC
to go back to the menu screen or
press the button for long to go back
to the standard screen without storing
settings.
Passenger front and side airbag
activation/deactivation and side
bag protection (chest/pelvis)
(where present)
This function is used to activate/
deactivate the front passenger’s airbag.
Proceed as follows:
- press button MENU
ESC and press
MENU ESC again after the message
(Bag pass: Off) (to deactivate) or
(Bag pass: On) (to activate) is displayed
by pressing buttons + and −;
– the confirmation request message
is displayed;
– press buttons
+ or −
to select (Yes) (confirming activation/
deactivation) or (No) (to abort);
– briefly press MENU
ESC to confirm
setting and go back to the menu screen
or press the button for long to go back
to the standard screen without storing
settings.
001-025 Ford KA EN:001-025 Ford KA IT 14-10-2010 11:20 Pagina 22